Filter
Top Products
59
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
HIBC Code 128
Purpose To specify an HIBC Code 128 bar code field.
Syntax
c16,m1,m2
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes The c16 command has two arguments, m1 and m2, and m1 defaults to 0.
The HIBC Code 128 bar code supports these modes:
m1 HIBC Code 128 Mode
0 Primary format.
1 Alternate Primary format.
2, m2 Secondary format with m2 as the linkage character and field
identifier.
3 Single format.
4 First data format.
5, m2 Second data format with m2 as the linkage character and
field identifier.
6 Multiple data format.