Filter
Top Products
Commands
Program Mode Commands
54
14177L-003 APL-I Reference Guide 11/24/09
PDF417
Purpose To specify a PDF417 bar code field.
Syntax
m1, m2 and m3 are the three arguments of the c12 command.
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
These label examples show a slight difference in dot pattern, bar codes with non-standard
characters print slightly smaller, and difference in magnification ranges.
Intermec 3400D Printer Label
APL-I Printer Label