Filter
Top Products
57
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
MaxiCode
Purpose To specify a Code MaxiCode bar code field.
Syntax
c14,m1
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
Notes The c14 command has one argument, m for mode, which auto defaults between
modes 2 through 4.
See the labels examples to see the differences between printers.
• Interpretive field fonts could be different.
• Bar codes might print. They do not print on 3400D printers.
Intermec 3400D Printer Label
APL-I Printer Label