Filter
Top Products
45
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
Program Mode Commands
Bar Code, Select Type
Purpose To choose the bar code field type.
Syntax
c
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command defines the Symbology of the bar code.
cn ,m1,m2,m3
Values for n:
0 = Code 39
2
= Interleaved 2 of 5
3
= Code 2 of 5
4
= Codabar
5
= Code 11
8
= HIBC Code 39
10
= Code 49
15
= JIS-ITF
16
= HIBC Code 128
17
= Datamatrix
If you use the Null character in the Bar code data stream, you will lose that character as well as
any following data. If using any of the following control characters (
<RS>, <GT>, <EOT>,
etcetera) you have to precede it with a
<SUB> character.