Filter
Top Products
Commands
Print Commands
26
14177L-003 APL-I Reference Guide 11/24/09
Field, Select
Purpose To choose a data field for data entry.
Syntax
<ESC>Fn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes You must set the parameter for this command to the field number or the field name.
Things to be aware of:
• If you do not set the 3parameter, the printer defaults it to 0.
• If you choose the field number, the printer enters data into field n.
• If you enter a field name, the printer enters the data into a field with a particular name.
• You must enclose the field name in quotation marks.
• Entering an invalid field code generates error code 38.
Field Decrement, Set
Purpose To set the field decrement value.
Syntax
<ESC>Dn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes In order to decrement the values in data entry fields, sections of data must be
separated by
<FS> or <GS>. The printer decrements by a previously specified amount.
Important If the amount is out of range, error code 22 is generated.
Field Increment, Set
Purpose To set the field increment value.
Syntax
<ESC>In
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes To use this command, you must create a format in programming mode. In order to
increment the values in data entry fields, sections of data must be separated by
<FS> or
<GS>.