Filter
Top Products
Control Panel Options
Control Panel Options
98
14177L-003 APL-I Reference Guide 11/24/09
33333
3
PRINT WIDTH
This allows you to set the printable area across
the label width.
33333
3
MAXIMUM LENGTH
This allows you to set the maximum length of
the label.
33
3
EARLY WARNING
MEDIA/SUPPLIES
WARNING
This allows you to enable or disable warnings
to appear if label or ribbons are low.
Password protected.
333
LABELS PER ROLL
This parameter appears only when Early
Warning for Media is enabled. This value
should correspond to the number of labels per
roll of the media that you are using.
333
MEDIA REPLACED?
This parameter appears only when Early
Warning for Media is enabled.
333
RIBBON LENGTH
This parameter appears only when Early
Warning for Media is enabled and the printer is
set for Thermal Transfer operation.
333
RIBBON REPLACED?
This parameter appears only when Early
Warning for Media is enabled and the printer is
set for Thermal Transfer operation.
333
3
EARLY WARNING
MAINT.
This allows you to enable or disable warnings
to appear if the printhead needs to be cleaned.
Password protected.
3 333
HEAD CLEANING
This allows you to enable or disable a warning to
appear when the printhead needs to be cleaned.
This value is set to correspond to the length of
the media or ribbon roll that you are using.
3 333
HEAD CLEANED?
This allows you to reset the printhead cleaning
counter.
3 333
HEAD LIFE
This allows you to set the number of inches of
media that the printhead is expected to print.
3 333
NEW PRINTHEAD
This allows you to reset the printhead life
counter.
333
3
NONRESET CNTR
This allows you to reset the advanced counter
used by the printer to monitor the label
generation in inches, centimeters, and number of
labels.
Table 3 • Control Panel Differences on Supported Printers (Continued)
XiIIIPlus
Z4Mplus/Z6Mplus
105SL
ZM400/ZM600
PAX4
Xi4
Control Panel Option Details and Menu Choices