Filter
Top Products
63
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
The names, purposes, and default values of these parameters are listed below:
Bar Code Field, Create or Edit
Purpose To edit or create a bar code field.
Syntax
Bn,name
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes By creating a bar code field and enabling the interpretive parameter, you
consequentially create an interpretive field.
Important If the field number is out of range, an error code 38 is generated.
Bitmap Cell Height for Graphic or UDF, Define
Purpose To determine the height of a graphic or user-defined font.
Syntax
yn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Sets the graphic or user-defined font height.
Default:
n = 1 Bitmap Fonts
n = 10 Outline fonts
n = 50 graphics
Values for n: 1 to 799
Note • Things to be aware of:
• n represents the number of rows for the graphic or font bitmap.
• If an invalid height is entered, an error code of 52 is generated.
Argument Description Default Value
m1 N u m b er o f c o l u m ns o f d a ta i n b a r co d e;
pos s i b l e v a l u e s o f 0 - 4 , w h e r e 0 l e t s t h e
printer set the best-fitting value.
0
m2 Num b er of ro w s o f d a ta in ba r c o de ;
p o s si b l e va l u e s de p e n d o n t h e va l u e o f m 1 ,
and 0 lets the printer set the best-fitting value.
0