Filter
Top Products
Commands
Print Commands
34
14177L-003 APL-I Reference Guide 11/24/09
User-Defined Tables, Transmit
Purpose To send the user-defined command and protocol tables so that the printer gets to
download a new command set.
Syntax
<ESC>Z
Not Supported This command does not work on the Zebra printer with APL-I, or it has
significant deviations from the 3400D printer.
Warm Boot
Purpose To reset the printer after other commands in the buffer are executed.
Syntax
<BS>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command is executed after all previous commands are completed. Any
information sent after this command is lost. When configuration commands require a printer
reset, use this command.