Filter
Top Products
Commands
Configuration Commands
38
14177L-003 APL-I Reference Guide 11/24/09
IBM Language Translation, Enable or Disable
Purpose To enable and disable the IBM language translation.
Syntax
<SI>in
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command overrides the language translation on the printer. This allows IBM
compatible characters to be used instead of ASCII characters derived from the printer’s
language.
Default Value: n = 0
Values for n:
0 = disable IBM
1
= enable IBM
Intercharacter Delay, Set
Purpose To determine the intercharacter delay for transmissions.
Syntax
<SYN>n
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command sets the delay time in milliseconds between characters in a printer
transmitted message.
Default: n = 0
Values for n: 0 – 9999