Avaya V880 Personal Computer User Manual


 
Maintenance
104 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
7. Enter:
luxadm remove loop_name,snumber
where loop_name is the name of the fiber channel loop, and
where number is the slot number for the disk drive.
Example:
luxadm remove FCloop,s3
A message similar to the following is displayed:
Note:
Note: If a "device is busy" message is displayed, verify that the correct device is
being removed. Retry the command using the -F option. For example, enter
luxadm remove -F FCloop,s3.
8. Verify that the disk you want to remove is displayed.
9. Choose one of the following:
If the correct device is displayed, enter: c
If the correct device is not displayed, enter: q
If you removed the device, a message similar to the following is displayed:
The amber LED for the disk turns on when the disk can be safely removed from the
computer. The green LED for the disk starts blinking slowly.
10. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap
on page 58 for more
information.
WARNING!!! Please ensure that no filesystems are mounted on these device(s).
All data on these devices should have been backed up.
The list of devices which will be removed is:
1: Box Name: "FCloop" slot 3
Node WWN: 20000004cf81e4d4
Device Type:Disk device
Device Paths:
/dev/rdsk/c1t3d0s2
Please verify the above list of devices and
then enter 'c' or <CR> to Continue or 'q' to Quit. [Default: c]:
stopping: Drive in "FCloop" slot 3....Done
offlining: Drive in "FCloop" slot 3....Done
Hit <Return> after removing the device(s).