Filter
Top Products
Setting the remote console modem options
Issue 2.0 June 2004 45
Setting the data rate
1. Press F2 to select "Configure."
"Ld EditArea frm" is displayed.
2. Press the Right Arrow once.
"Active(Saved)" is displayed.
3. Press F1.
"Choose Function" is displayed.
4. Press F1 to select "Edit."
"Edit StrapGroup" is displayed.
5. Press F1 to select "DTE_Interface."
"Async/Sync Mode" is displayed.
6. Press F1 to select "Nxt."
"Async DTE Rate" is displayed.
7. Press the Right Arrow five times to display "9600."
8. Press F2 to select "9600."
Setting the handshake options
1. Press F1 for "Nxt."
"Asyn #Data Bits (8)" is displayed.
2. Press F1 for "Nxt."
"Asyn Parity Bit (None)" is displayed.
3. Press F1 for "Nxt."
"Asyn #Stop Bits (1)" is displayed.
4. Press F1 for "Nxt."
"DTR Action (Ignore)" is displayed.
5. Press F1 for "Nxt."
"DSR Control (Forced_On)" is displayed.
6. Press F1 for "Nxt."
"RTS Action (Ignore)" is displayed.
7. Press F1 for "Nxt."
"CTS Control (WinkWhenDisc)" is displayed.
8. Press F1 for "Nxt."
"RTS/CTS Delay (0 msec)" is displayed.