Filter
Top Products
Maintenance
112 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Setting up replacement disk drives
After you replace defective disk drives, do one of the following, depending on drives
replaced:
Drives replaced Procedure
One boot disk Partition the new boot disk drive (see Partitioning replacement disk
drives on page 113). Continue with the procedures in "Recovering a
mirrored system after disk failure" in the maintenance chapter of the
CMS software installation, maintenance, and troubleshooting
document for your CMS release.
Both boot disks Continue with the procedures in "Performing a CMSADM restore of a
mirrored or non-mirrored system" in the maintenance chapter of the
CMS software installation, maintenance, and troubleshooting
document for your CMS release.
Data disks Partition and administer the drive so that it works with the existing
disk drives (see Partitioning replacement disk drives
on page 113).
Continue with the procedures in "Recovering a mirrored system after
disk failure" in the maintenance chapter of the CMS software
installation, maintenance, and troubleshooting document for your
CMS release.