Filter
Top Products
Troubleshooting
200 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Remote console port problems
This section contains problems you may encounter with the remote console port.
Symptom - The remote console port will not initialize for dialing in or dialing out.
Solution - To correct this problem:
1. Enter:
sacadm -l
If the system status reports NO_SAC, the port is not working properly.
2. Enter:
/cms/install/bin/abcadm -i -b 9600 ttya
The following message should be displayed:
If this message is not displayed, continue with Step 3.
3. Enter:
/cms/install/bin/abcadm -r ttya
The following message is displayed:
4. Enter: y
The following message is displayed:
The port monitor turns off.
5. Enter:
ps -ef | grep sac
This finds any SAC processes that are running. If any processes are found, continue
with Step 6. Otherwise, continue with Step 7.
ttya set to incoming port 9600 baud
ttya is currently set to be incoming
Are you sure you want to change it? [y,n,?]
ttya administration removed