Filter
Top Products
Setting the remote console modem options
Issue 2.0 June 2004 47
Saving your settings
1. Press the Single Up Arrow to display "Choose Function" and "Edit Save."
2. Press F3 to select "Save."
"Save EditArea to" is displayed.
3. Press F1 to select "Active(Saved)."
"Command Complete" is displayed.
4. Press the Single Up Arrow again to display "Save EditArea to."
5. Press the Right Arrow once to select "Customer 1."
6. Press F1 to save to "Customer 1."
"Command Complete" is displayed.
7. Press the Double Up Arrow.
"Idle: 9600" and "Status Configure" are displayed. If the modem is turned off, it should
return to this state when it is turned on.
8. To check the status of the Comsphere 3910 modem, use the "Status" choice in the
top-level menu, or use the Right and Left Arrow buttons to view other top-level menu
choices.