Filter
Top Products
Maintaining disk drives
Issue 2.0 June 2004 107
22. Press Enter.
A message similar to the following is displayed:
Note:
Note: Ignore the message No new enclosure(s) were added!!.
23. If you are installing more than one disk drive, wait for the green light on the drive you
just installed to light steadily (not flashing) before installing another drive. Repeat
Steps 3 through 22.
24. Close the front door and, if necessary, lock it.
25. Continue with Setting up replacement disk drives
on page 112.
Waiting for Loop Initialization to complete...
New Logical Nodes under /dev/dsk and /dev/rdsk :
c1t3d0s0
c1t3d0s1
c1t3d0s2
c1t3d0s3
c1t3d0s4
c1t3d0s5
c1t3d0s6
c1t3d0s7
No new enclosure(s) were added!!