Filter
Top Products
Maintenance
108 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Replacing both boot disks
To replace both boot disk drives:
1. If the system is operating, enter:
/usr/sbin/shutdown -y -i0 -g0
The system shuts down and displays the ok prompt.
2. Press and release the front panel power button to turn off the system.
Wait for the front panel Power/OK LED to turn off.
3. Turn the key switch to the Forced Off position. See the following figure.
!
DANGER
:
DANGER: Be sure to turn the key switch to the Forced Off position before handling any
internal components. Otherwise, it is possible for a user to restart the
system remotely while you are working inside it. The Forced Off position is
the only key switch position that prevents an RSC user from restarting the
system.
4. Turn off the system monitor.
5. If any external SCSI devices are installed, turn off the SCSI devices starting with the
device that is closest to the system and work towards the farthest device.
6. Unlock and open the front door.
7. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap
on page 58 for more
information.
8. Using your thumb and forefinger, push the drive latch upward to release the drive
handles for the disks in slots 0 and 3. Swing the handle away from the drive until you