Filter
Top Products
Maintenance
140 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
5. Rotate the CPU/Memory board ejection levers out so that the CPU/Memory board
connectors disengage from the motherboard. See the following figure.
6. Pull the CPU/Memory board from the chassis.
7. Place the CPU/Memory board on an antistatic mat or in an antistatic bag.
Replacing memory
This section describes the procedures used to replace memory on a CPU/Memory board
that you have already removed from the system (see Removing a CPU/Memory board
on
page 139). The board contains 4-GB of memory. When replacing memory modules, you
must replace modules in groups of four within a bank of memory.
Tip:
Tip: The procedure for replacing memory is summarized on the top of the CPU/
Memory board.
To replace memory modules:
1. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See Using an ESD wrist strap
on page 58 for more
information.