Filter
Top Products
Maintaining PCI cards
Issue 2.0 June 2004 93
23. Enter:
boot -r
This reboots the system so that it recognizes the new HSI/P card.
Note:
Note: Sometimes the system fails to recognize a newly installed HSI card. If this
happens, the command show-devs does not show the HSI card and /
var/adm/messages fails to recognize the card upon bootup. See the
troubleshooting chapter of Avaya Call Management System Switch
Connections, Administration, and Troubleshooting for information about
troubleshooting HSI/P cards.
24. When the system comes back up, log in as root.
25. Enter:
cfgadm
This displays the PCI card configuration after you add the card. Make sure that the
new card is displayed.
26. Administer the switch links as shown in Setting up the switch link for each ACD
on
page 88.