Filter
Top Products
Troubleshooting tape drives
Issue 2.0 June 2004 189
Troubleshooting tape drives
Use the following procedures to troubleshoot tape drives:
● Checking tape status
● Reassigning device instance numbers for tape devices on page 191
Checking tape status
For many procedures, you must identify what tape drive, by device path, you will use for
the procedure. Tape drives are assigned to particular device paths, usually one of the
following:
● /dev/rmt/0
● /dev/rmt/0c
● /dev/rmt/1
● /dev/rmt/1c
Note:
Note: The letter c at the end of the device name indicates that the tape device can
operate in compressed mode. Avaya recommends that you use compressed
mode at all times.