Filter
Top Products
1. When ManageRemainRoll
in the printer menu is set to On, the roll longer than the length of a single page of the
print job is used.
When ManageRemainRoll is set to Off and both rolls are longer than the print job, the second condition determines
which roll is used.
Note
• When
the roll currently advanced is a type of paper that cannot be cut and the printed pages have not
been cut, the currently advanced roll is used.
• If both rolls are too short, an error message is displayed.
2. Use a type of paper that matches the print job.
When
both or neither loaded roll matches the type of paper in the print job, the third condition determines which roll
is used.
Note
• When Detect Mismatch in
the printer menu is set to Warning or None, the roll is determined by the
following conditions.
• When neither loaded roll matches the type of paper in the print job and Detect Mismatch in the print-
er menu is set to Pause, an error message is displayed.
3. If Roll Switching in the printer menu is set to No RollSwitching, the currently advanced roll is used.
If Roll Switching in the printer menu is set to Use Optimal Size, the fourth condition determines which roll is used.
4. When the print job calls for borderless printing, the roll compatible with borderless printing is used.
When
the print job does not specify borderless printing, or if both rolls are compatible with borderless printing, the
fifth condition determines which roll is used.
Note
• If neither roll is compatible with borderless printing, an error message is displayed.
5. Use a size of paper that matches the width specified in the print job.
When
both loaded rolls match the width of paper in the print job or the width is not specified in the job, the sixth
condition determines which roll is used.
When Width Detection is set to Off, the seventh condition determines which roll is used.
Note
• When neither loaded roll matches the width specified in the print job, an error message is displayed.
6. Use a size of paper that accommodates the width specified in the print job.
When
both loaded rolls can accommodate the width specified in the print job, the seventh condition determines
which roll is used.
Note
• When Detect Mismatch in
the printer menu is set to Warning or None, the roll is determined by the
following conditions.
• When neither loaded roll is wide enough for the print job and Detect Mismatch in the printer menu is
set to Pause, an error message is displayed.
7. The roll closest to the roll width specified in the print job is used.
If both rolls are equally close to the specified width, the currently advanced roll is used.
Handling Paper
>
Handling rolls
>
Automatic Roll Switching iPF825
7
662
Downloaded from ManualsPrinter.com Manuals