Filter
Top Products
7. Lower the Release Lever and close the Top Cover.
8. In a crouching position, push the Roll Unit in.
9. Position the Wheeled Output Stacker by the printer. (See "Using the Wheeled Output Stacker.") →P.671
10. Turn the printer on. (See "Turning the Printer On and Off.") →P.702
Roll Paper Cannot be Inserted into the Paper Feed Slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
If paper cannot be advanced from Roll 2 (Lower),
the Roll Unit Cable is disconnected.
Connect the Roll Unit Cable firmly to the Roll Unit Power Sup-
ply Inlet and the inlet on the roll unit.
Troubleshooting
>
Problems Regarding Paper
>
Roll Paper Cannot be Inserted into the Paper Feed Slot iPF825
12
856
Downloaded from ManualsPrinter.com Manuals