Filter
Top Products
Other Messages
GARO Wxxxx (x represents a number) ........................................................................................................... 913
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 913
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................... 913
Top cover is open. ........................................................................................................................................... 914
Prepare for parts replacement. ........................................................................................................................ 914
Parts replacement time has passed. ............................................................................................................... 914
Unknown file. ................................................................................................................................................... 914
Multi-sensor error ............................................................................................................................................ 915
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred.
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The
paper was not advanced because the trailing edge is taped to
the roll.
Turn off the printer and remove the roll from the print-
er before restoring power.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds be-
fore restoring the power.
Error Message
>
Other Messages
>
iPF825 GARO Wxxxx (x represents a number)
13
913
Downloaded from ManualsPrinter.com Manuals