Filter
Top Products
Configuring the Communication Mode Manually
This topic gives instructions for configuring the communication mode manually.
1. Press the Menu button to display MAIN MENU.
2. Press ▲ or ▼ to select Interface
Setup, and then press the ▶ button.
3. Press ▲ or ▼ to select Ethernet Driver, and then press the ▶ button.
4. Press ▲ or ▼ to select Auto Detect, and then press the ▶ button.
5. Press ▲ or ▼ to select Off, and then press the OK button.
Return to the Ethernet Driver menu.
6. Press ▲ or ▼ to select Comm.Mode, and then press the ▶ button.
7. Press ▲ or ▼ to select the communication mode, and then press the OK button.
Return to the Ethernet Driver menu.
8. Press ▲ or ▼ to select Ethernet Type, and then press the ▶ button.
9. Press ▲ or ▼ to select the Ethernet type, and then press the OK button.
Return to the Ethernet Driver menu.
10. Press ▲ or ▼ to select Spanning Tree, and then press the ▶ button.
11. Press ▲ or ▼ to enable or disable spanning tree support, and then press the OK button.
Return to the Ethernet Driver menu.
Network Setting
>
Network Setting
>
Configuring the Communication Mode Manually iPF825
10
776
Downloaded from ManualsPrinter.com Manuals