Filter
Top Products
Contents
x
Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Configuring the OC-3 Uplink 5-10
Establishing the BPX 8600-to-BPX 8600 Series Segment 5-12
CiscoView Configuration of a Feeder 5-13
Selecting an MGX 8230 5-13
Specifying the Feeder Application 5-14
Activating a Physical Line for the Uplink 5-14
Configuring Logical Interfaces for the Feeder 5-15
Configuring the Line as a Feeder Trunk 5-16
CHAPTER
6 Card and Service Configuration 6-1
Connections on a Feeder 6-1
Modifying the Resource Partitioning 6-1
Sequence of Configuration Tasks 6-2
Rules for Adding Connections 6-2
Rules for Adding a DAX Connection 6-2
Rules for Adding Three-Segment Connections 6-3
The Processor Switching Module 6-5
Configuring Synchronization for the Shelf 6-5
Clock Sources 6-5
Clock Source Types 6-6
Clock Source Configuration 6-6
Configuration Example 6-6
Configuring PXM1 Card-Level Parameters, Lines, and Ports 6-7
Automatic Protection Switching on the PXM1 6-9
APS Requirements 6-9
APS Configuration 6-9
Adding Connections on a PXM1 in a Stand-Alone Node 6-10
ATM Universal Service Module (AUSM) 6-14
Summary of AUSM Features 6-14
Configure the Card, Lines, and Ports 6-15
Configure Inverse Multiplexing 6-17
Adding and Configuring Connections on the AUSM/B 6-17
BPX 8600-to-BPX 8600 Segment 6-23
Frame Service Module Features 6-23
Summary of Frame Service Module Features 6-24
MGX-FRSM-2CT3 Features 6-25
MGX-FRSM-2T3E3 Features 6-25
MGX-FRSM-HS2 Features 6-26
MGX-FRSM-HS1/B Features 6-26