Cisco Systems MGX 8230 Network Router User Manual


 
1-11
Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Chapter 1 Introducing the MGX 8230
MGX 8230 System Overview
Figure 1-8 Cell Bus Distribution
MGX 8230 Management
Firmware on each card determines the functions and operations of the module. This firmware can be
upgraded by downloading new firmware with a TFTP application running on a workstation or a PC.
The current status and configuration parameters of the modules reside in a Management Information
Base (MIB). The MIB is updated by the firmware in the modules whenever changes to the module status
or configuration occur. The MIB can be interrogated using SNMP commands.
The MGX 8230 supports the following user interface applications:
Cisco WAN Manager (formerly StrataView Plus): a Graphical User Interface (GUI) application for
connection management. This application enables operations, administration, and maintenance of
WAN-multiservice networks.
CiscoView: a GUI application for hardware configuration.
Table 1-1 Cell Bus Distribution
Left Side Chassis Right Side Chassis
Physical Slot #12345671011121314
Slot ID Address 1s 2s 9 A B C D 9 A B C D
CB0_A/B x
CB1_A/B x
CB2_A/B x
CB3_A/B x
CB4_A/B x
CB5_A/B x
CB6_A/B x
CB7_A x x
CB7_B x x
1
2
3
4
5
6
7
10
11
12
13
14
CB0
CB6
CB1
CB5
CB2
CB4
CB3
CB7
PXM
PXM
Left side of chassis Right side of chassis
38376
8
9