Cisco Systems MGX 8230 Network Router User Manual


 
6-19
Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Chapter6 Card and Service Configuration
ATM Universal Service Module (AUSM)
cnfupcvbr has the same syntax and parameters as cnfupcabr
cnfupcvbr or cnfupcabr <port.vpi.vci> <enable> <pcr[0+1]> <cdvt[0+1]> <scr> <scr_police> <mbs>
<IngPcUtil> <EgSrvRate> <EgPcUtil> <clp_tag>
EgSrvRate is the egress service rate. Without IMA, the range is as follows:
T1, 103622 cells per second
E1, 104528 cells per second
clear E1, 104830 cells per second
For IMA, multiply the line rate by the number of links.
EgrPcUtil is the percent utilization on the egress. The range is 1127.
The default is 0.
port.vpi.vci identifies the connection.
enable is the enabled/disable for UPC: 1=Disable, 2=Enable.
pcr is the peak cell rate. Without IMA, the range is as follows:
T1, 103622 cells per second
E1, 104528 cells per second
clear E1, 104830 cells per second
For IMA, multiply the line rate by the number of links.
cdvt cdvt[0+1] is the cell delay variation tolerance for cells with
CLP=[0+1]. The range is 1250000 micro seconds.
scr is the peak cell rate. Without IMA, the range is as follows:
T1, 103622 cells per second
E1, 104528 cells per second
clear E1, 104830 cells per second
For IMA, multiply the line rate by the number of links.
scr_police specifies the type of scr policing: 1= CLP[0] cells,
2=CLP[0+1] cells, and 3=no SCR policing.
mbs is the maximum burst size: the range is 15000 cells.
IngPcUtil is the percent utilization on the egress. The range is 1127. The
default is 0.