Filter
Top Products
4–25
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
NOTE: Figure 4–1 shows an example of a heterogeneous host configuration. For
supported host operating systems, refer to the
HSZ80 Array Controller ACS
Version 8.3 Release Notes
.
Figure 4–1. Setting Host Modes
To reassign targets 2 and 3 to the Windows NT Server mode, use the following
syntax:
SET THIS_CONTROLLER HOST_FUNCTION = (2,D)
SET THIS_CONTROLLER HOST_FUNCTION = (3,D)
The controller will then use default SCSI-2 behavior when units D0–D2 and
D100–D102 are accessed by a host. It will also use Windows-NT-compatible SCSI-2
behavior when units D200–D202 and D300–D302 are accessed by a Windows NT
host.
Host bus
Windows
NT
Digital
OpenVMS
HSZ80
Port 1 Port 2
Controller device bus
CXO6477A
Controller device bus
D0 D1 D2 D100 D101 D102 D200 D201 D202 D300 D301 D302