Filter
Top Products
5–35
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
CLEAR_ERRORS CLI
Stops the display of current or previous error messages at the CLI prompt. This
command does not clear the error conditions, it only stops the display of errors at the
CLI prompt.
After the cause of the error condition has been corrected, issue the CLEAR_ERRORS
CLI command to clear the error message.
NOTE: There are three message types: info—general information; warning—user
may want to examine, but command will be executed; and error—command will
not execute.
Syntax
CLEAR_ERRORS CLI
Example
This example shows how to clear the message “All NVPM components initialized to
their default settings” from the CLI prompt:
All NVPM components initialized to their default settings
CLEAR_ERRORS CLI
See also
CLEAR_ERRORS controller INVALID_CACHE
CLEAR_ERRORS unit-number LOST_DATA
CLEAR_ERRORS device-name UNKNOWN
CLEAR_ERRORS unit-number UNWRITEABLE_DATA