Filter
Top Products
5–51
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
DELETE
container-name
Deletes a container belonging to the controller’s configuration. You cannot delete a
container in use by a higher-level container. For example, you cannot delete a disk
belonging to a member of a RAIDset, or a RAIDset unit; you must first delete the
higher-level container or containers.
NOTE: This command does not delete spareset or failedsets. You cannot delete
spareset and failedset containers. See the DELETE FAILEDSET and DELETE
SPARESET commands for details.
When a storageset is deleted, the individual disks are free to be used by another
container. If you create the container again with the exact same disk configuration,
and none of the disks have been used for anything, or initialized, then the container
can be reassembled using its original disks.
Syntax
DELETE container-name
Parameters
container-name
Identifies the container to be deleted. This is the name given to the container when it
was created using the ADD command (for example, ADD DISK, ADD STRIPESET,
and so forth).
Examples
This example shows how to delete a disk drive named DISK10000:
DELETE DISK10000
This example shows how to delete a stripeset named STRIPE1:
DELETE STRIPE1