Filter
Top Products
I–5
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
CONFIGURATION RESET, 5–44
CONFIGURATION RESTORE, 5–45
Configuration rules
devices, 2–2
LUN capacity, 2–2
mirrorsets, 2–2
partitions per storageset, 2–2
RAID-5 and RAID-1 storagesets, 2–2
RAID-5 storagesets, 2–2
RAID-5, RAID-1, and RAID-0 storagesets,
2–2
requirements, 2–2
striped mirrorsets, 2–2
stripesets, 2–2
See also Summary of controller features
CONFIGURATION SAVE, 5–47
Configuration utility. See CONFIG utility
Configuring
controller, 2–3, 2–29
dual-redundant controller configurations,
2–29
dual-redundant controller configurations with
mirrored cache, 2–31
mirrorsets, 4–4
multiple-bus failover, 2–30
RAIDsets, 4–6
single-disk unit, 4–9
striped mirrorsets, 4–7
stripesets, 4–3
Configuring using CLI
mirrorsets, 4–4
RAIDsets, 4–6
single-disk units, 4–9
storagesets, 4–2
striped mirrorsets, 4–7
stripesets, 4–3
Connecting, 2–15
dual-redundant controllers to the host, 2–15
local connection to the controller, 2–26
multiple-bus failover, dual-redundant
controllers to the host, 2–21
PC connection to the controller, 2–26
single controller to the host, 2–15
terminal connection to the controller, 2–26
Container
initializing, 5–62
Controller
“this” and “other” defined, xviii
addressing, 3–36
backplane, 1–8
changing the CLI prompt, 2–22
communicating from a local terminal, 2–27
configuring, 2–3, 2–29
controller and cache module location, 1–13
displaying information, 5–136
dual-redundant controller configuration,
2–15, 2–29
dual-redundant controller configurations with
mirrored cache, 2–31
ECB diagnostics, 1–31
fault LEDs, 1–13
general description, 1–7
host ports, 1–8
illustration of parts, 1–9
local connection, 2–26
location, 1–2, 1–13
maintenance port, 1–8
multiple-bus failover configuration, 2–30
multiple-bus failover mode, 2–30
multiple-bus failover, dual-redundant
controller configuration, 2–21
node IDs, 3–30