Filter
Top Products
5–136 CLI Commands
SHOW
Displays information about controllers, storagesets, devices, partitions, and units.
The SHOW command may not display some information for devices accessed
through the companion controller in a dual-redundant configuration. When
information regarding a device or parameter does not appear, enter the same SHOW
command from a terminal on the other controller.
Syntax
SHOW controller
SHOW device-name
SHOW device-type
SHOW EMU
SHOW storageset-name
SHOW storageset-type
SHOW unit-number
SHOW UNITS
Parameters
controller
Specifies the controller to be displayed.
THIS_CONTROLLER
OTHER_CONTROLLER
device-name
Specifies the name of a particular device to be displayed. For example, SHOW
DISK20100 displays information about the device named DISK20100.