Filter
Top Products
5–19
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
ADD RAIDSET
Names a RAIDset and adds the RAIDset to the controller’s configuration. Compaq
RAIDsets are often referred to as RAID level 3/5 storagesets because they use the best
characteristics of RAID level 3 and RAID level 5. The number of members in the
storageset is determined by the number of containers specified by the container-name
parameter in the command. The data capacity of the RAIDset is determined by the
storage size of the smallest member.
Syntax
ADD RAIDSET RAIDset-name container-name1 container-name2 container-name3
[container-nameN]
Parameters
RAIDset-name
Assigns a name to the RAIDset. This is the name used with the ADD UNIT command
to identify the RAIDset as a host-addressable unit.
The RAIDset name must start with a letter (A through Z) and may consist of a
maximum of nine characters including letters A through Z, numbers 0 through 9,
periods (.), dashes (-), or underscores (_).
IMPORTANT: It is common to name a RAIDset RAID
n
, where
n
is a sequentially
assigned, unique identifier. This naming convention presents the user with the
type of container and its unique identifier.
container-name1 container-name2 container-name3 [container-nameN]
Identifies the disks making up the RAIDset. RAIDsets must include at least 3 disk
drives, and no more than 14.