Filter
Top Products
5–9
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
■ Setting the switch to REMOTE forces a disk to be NOTRANSPORTABLE.
TRANSFER_RATE_REQUESTED=ASYNCHRONOUS
TRANSFER_RATE_REQUESTED=20MHZ (Default)
TRANSFER_RATE_REQUESTED=10MHZ
TRANSFER_RATE_REQUESTED=5MHZ
Specifies the maximum data transfer rate at which the controller is to communicate
with the disk drive. The user might need to limit the transfer rate to accommodate
long cables between the controllers and the device.
Examples
This example shows how to add DISK10000 at port 1, target 0, LUN 0:
ADD DISK DISK10000 1 0 0
This example shows how to add DISK40200 as a transportable disk drive to port 4,
target 2, LUN 0.
ADD DISK DISK40200 4 2 0 TRANSPORTABLE
This example shows how to:
■ Add a disk drive named DISK30200 as a non-transportable disk to port 3, target
2, LUN 0
■ Set the data transfer rate to 10 MHz.
Enter the following command on one line.
ADD DISK DISK30200 3 2 0 NOTRANSPORTABLE
TRANSFER_RATE_REQUESTED=10MHZ