Filter
Top Products
5–36 CLI Commands
CLEAR_ERRORS
controller
INVALID_CACHE
Clears an invalid cache error and allows the controller and cache to resume operation.
If the error is due to an incorrectly mirrored configuration, the controller indicates
mirrored mode status after the error is cleared.
Use this command for the following situations:
■ When the controller or cache modules have been replaced, resulting in
mismatched data between the controllers.
■ When the controller or cache module is replaced while data is still in cache and
not properly flushed with the SHUTDOWN or SET NOFAILOVER commands.
Syntax
CLEAR_ERRORS controller INVALID_CACHE
Spell out INVALID_CACHE when using this command.
Parameters
controller
Identifies which controller is to receive the CLEAR_ERRORS command. You must
specify THIS_CONTROLLER or OTHER_CONTROLLER.
data-retention-policy
DESTROY_UNFLUSHED_DATA
NODESTROY_UNFLUSHED_DATA (Default)
Instructs the controller how to handle write-back cached data.
Specify NODESTROY_UNFLUSHED_DATA (default) to retain the cached data and
discard controller information.
Specify DESTROY_UNFLUSHED_DATA to retain the controller information and
discard the cached data.