Filter
Top Products
5–42 CLI Commands
CLEAR_ERRORS
unit-number
UNWRITEABLE_DATA
Clears an unwriteable data error on a unit.
It affects all partitions on the same container.
If a storageset or disk drive fails before its data has been written to it, the controller
reports an unwriteable data error. The CLEAR_ERRORS UNWRITEABLE_DATA
command removes the data from the cache and clears the unwriteable data error.
CAUTION: This command causes data loss.
Syntax
CLEAR_ERRORS unit-number UNWRITEABLE_DATA
Spell out UNWRITEABLE_DATA when using this command.
Parameters
unit-number
Identifies the unit having the unwriteable data error. The unit-number is the name
given to the unit when it was created with the ADD UNIT command.
Example
This example shows how to clear the unwriteable data error on disk unit D103:
CLEAR_ERRORS D103 UNWRITEABLE_DATA