Filter
Top Products
5–47
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
CONFIGURATION SAVE
Forces a current copy of configuration information in a controller’s non-volatile
memory into a configuration file on a disk. This allows the user to determine when a
copy of the configuration is saved. Use this command to explicitly save a single
controller’s configuration. The command takes effect immediately. In a dual-
redundant configuration, issue this command to both controllers.
Use the INITIALIZE container-name SAVE_CONFIGURATION command to set up
the location of the configuration file on disk.
Syntax
CONFIGURATION SAVE
See also
CONFIGURATION RESET
CONFIGURATION RESTORE
INITIALIZE