Filter
Top Products
1–16 General Description
Disk Inline Exerciser
Use the disk inline exerciser (DILX) to investigate the data-transfer capabilities of
disk drives. DILX tests and verifies operation of the controller and the SCSI–2 disk
drives attached to it. DILX generates intense read and write loads to the disk drive
while monitoring the drive’s performance and status.
Configuration Utility
Use the configuration (CONFIG) utility to add one or more storage devices to the
subsystem. This utility checks the device ports for new disk drives, then adds them to
the controller’s configuration and automatically names them.
HSUTIL
Use HSUTIL to upgrade the firmware on disk drives in the subsystem and to format
disk drives.
Code Load and Code Patch Utility
Use the Code Load/Code Patch (CLCP) utility to upgrade the controller software and
the EMU software. You can also use it to patch the controller software. Whenever you
install a new controller, you must have the correct software version and patch number.
IMPORTANT: Only Compaq field service personnel are authorized to upload EMU
microcode updates. Contact the Customer Service Center (CSC) for directions in
obtaining the appropriate EMU microcode and installation guide.
Clone Utility
Use the Clone utility to duplicate the data on any unpartitioned mirrorset. Back up the
cloned data while the actual storageset remains online.