Filter
Top Products
2–19
Compaq HSZ80 Array Controller ACS Version 8.3 Configuration and CLI Reference Guide
8. Set the host function mode for the controller using the target ID numbers set in
step 7. Use the following command:
NOTE: The default host function mode defaults to Host Mode A. The
HOST_FUNCTION switch changes the host function mode to a different mode.
SET THIS_CONTROLLER HOST_FUNCTION= (
ID, MODE
)
or
SET OTHER_CONTROLLER HOST_FUNCTION= (
ID, MODE
)
To change the host function mode, see “SET controller,” page 5–91 for information
on the HOST_FUNCTION switch.
9. Restart the controllers using the following command:
NOTE: After restarting the other controller, the EMU alarm will sound. To stop it,
restart this controller.
RESTART OTHER_CONTROLLER
RESTART THIS_CONTROLLER
See “RESTART controller” in Chapter 5, “CLI Commands.”
10. Set the time on the controller, which provides a baseline for replacing the
external battery, using the following command:
SET THIS_CONTROLLER TIME=DD-MMM-YYYY:HH:MM:SS
NOTE: All values are numbers, except for MMM, which uses the first three
letters of the month. When setting hours, minutes, and seconds—HH, MM,
and SS—you must use 24-hour time.