Filter
Top Products
100 Installing System Components
Figure 3-20. Removing and Installing a Tape Drive (SAS Connection)
7
If you are installing another drive in the bay, see "Installing an Optical or
Tape Drive" on page 101.
8
If the drive is being permanently removed, install an insert on the front
drive bezel. See
"Installing an Insert on the Front Drive Bezel
" on
page 67.
9
Replace the front drive bezel. See
"Installing the Front Drive Bezel
" on
page 66.
1 drive release latch 2 drive bay screw slots
3 drive alignment screws 4 SAS tape drive
5 SAS cable
5
1
2
4
3