Filter
Top Products
Installing System Components 79
• Tape backup unit
• Optical drives
6
Remove the two screws that secure the power supply to the system. See
Figure 3-8.
7
Press the power supply release tab, and slide the power supply out from the
back of the system. See Figure 3-8.
8
If you plan to replace a non-redundant power supply with redundant power
supplies, you will need to replace the power supply cage cover with the
power supply distribution board and its shroud.
a
Remove the power supply cage cover by pulling the blue release pins
until they unlock from the power supply cage, and lift the cover out of
the chassis. See Figure 3-41.
b
Install the power supply distribution board and its shroud. See
"Installing the Power Supply Distribution Board" on page 147.