Filter
Top Products
16 About Your System
Figure 1-2. Back-Panel Features and Indicators
Connecting External Devices
When connecting external devices to your system, follow these guidelines:
• Most devices must be connected to a specific connector and device drivers
must be installed before the device operates properly. (Device drivers are
normally included with your operating system software or with the device
itself.) See the documentation that accompanied the device for specific
installation and configuration instructions.
• Always attach an external device while your system and the device are
turned off. Next, turn on any external devices before turning on the system
(unless the documentation for the device specifies otherwise).
See "Using the System Setup Program" on page 43 for information about
enabling, disabling, and configuring I/O ports and connectors.
1 expansion card slots (5) 2 NIC connector
3 USB connectors (5) 4 serial connector
5 video connector 6 power connector(s)
1
4
5
6
2
3