Filter
Top Products
178 Troubleshooting Your System
13
Open the system. See "Opening the System" on page 68.
14
Remove the expansion card shroud. See "Removing the Expansion Card
Shroud" on page 72.
15
Remove all expansion cards installed in the system. See "Removing an
Expansion Card" on page 107.
16
Install the expansion card shroud. See "Installing the Expansion Card
Shroud" on page 75.
17
Close the system. See "Closing the System" on page 70.
18
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
19
Run the appropriate online diagnostic test to see whether the diskette
drive works correctly.
If the tests run successfully, an expansion card may be conflicting with the
diskette drive logic, or an expansion card may be faulty. Continue to the
next step.
If the tests fail,
see
"Getting Help" on page 205
.
20
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and peripherals.
21
Remove the expansion card shroud. See "Removing the Expansion Card
Shroud" on page 72.
22
Open the system. See "Opening the System" on page 68.
23
Reinstall one of the expansion cards you removed in step 15. See
"Installing an Expansion Card" on page 110.
24
Install the expansion card shroud. See "Installing the Expansion Card
Shroud" on page 75.
25
Close the system. See "Closing the System" on page 70.
26
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
27
Run the appropriate online diagnostic test to see whether the diskette
drive works correctly.