Filter
Top Products
68 Installing System Components
Figure 3-3. Removing and Installing a Front Drive Bezel Insert
Opening the System
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the system and protecting against electrostatic
discharge.
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and peripherals.
2
Press the power button to ground the system board.
3
Rotate the system feet inward (see Figure 3-4).
1 front drive bezel 2 drive bezel insert
3 tab notch 4 insert tab
5 screws for an optional
5.25-inch drive (3)
1
4
2
5
3