Filter
Top Products
Installing System Components 71
Removing and Installing Blank Drive EMI Fillers
Depending on the configuration of your system, a blank drive EMI filler
might be installed in place of an optical or diskette drive. These are essential
for airflow efficiency and for electromagnetic interference (EMI) protection.
You must remove the blank drive EMI filler if you decide to replace it with an
optional diskette or optical drive. Squeeze the filler tabs, and pull the filler
out of the chassis. See Figure 3-5.
To replace the blank drive EMI filler, push the filler into the slot on the
chassis until the filler tabs lock into place.
Figure 3-5. Removing and Installing a Blank Drive EMI Filler
1 filler tabs 2 blank drive EMI filler
2
1