Filter
Top Products
DISASSEMBLY AND ASSEMBLY
Rev. B
3-2
5
Step 5: Remove the four CBB (M3x12) screws and two CBS (O) (M3x8) screws securing the C204 MAIN
board unit and remove the board.
: CBB(M 3X12) X 4
: CBS(O)(M 3X8) X 2
C 204 M AIN Board U nit
H ooks for C 204 M AIN Board Installation
Figure 3-34. C204 MAIN Board Removal 4/4
When you install the C204 MAIN board assembly, perform the following adjustments:
z
Platen gap motor value (platen gap) adjustment (described in Section 4.1.7).
z
Bidirectional printing adjustment (described in Section 4.1.8).
ADJUSTMENT REQUIRED