Filter
Top Products
DFX-8500
Rev. B
6-
2
Table 6-2. Lubrication Points
Ref. No. Ref. Figure Lubrication Point Lubricant
(1) 6-3 Carriage oil pad ring (on both left and right sides of carriage) O2
(2) 6-3 Carriage oil pad (under the carriage head cable holder), O2
(3) 6-3 Hole holding the tip of the rear carriage guide shaft (in both left
and right side frames
G26
(4) 6-3 Both edges of the rear carriage guide shaft G26
(5) 6-3 Parallelism adjustment lever (contact point with the rear carriage
guide shaft
G26
(6) 6-4 Rear carriage shaft holding lever (contact point with the rear
carriage guide shaft)
G26
(7) 6-3 Carriage guide shaft (on the both front and rear shafts) G26
(8) 6-4 Platen roller shaft holder (contact point with the platen roller) G26
(9) 6-4 Paper bail gear G26
(10) 6-2 Shafts of paper feed gears (shafts on the left frame) G26,O2
(11) 6-2 Paper feed gears (gears on the left frame) G26
(12) 6-2 Tension pulley (pulley shaft and hook for the tension pulley spring) G26
(13) 6-3 Fulcrum point for the paper bail shaft and plunger G26
(14) 6-4 Platen gap motor pinion G26
(15) 6-3 Carriage guide shaft gear G26
(16) 6-3 Ribbon feed gears G26
(17) 6-3 Tractor select cam G26
Table 6-3. Adhesive Application Points
Ref. No. Ref. Figure Adhesive Application Point Adhesive
(25) 6-3 Tractor tension wire Neji Lock #2 (G)
Figure 6-1. Correct Adhesive Application