Filter
Top Products
DFX-8500
Rev. B
2-2
4
13. Paper width sensor
Detection form: Photo reflector
Output form : Emitter follower
Judgemwnt : No paper present: Standard voltage level.
Paper present: The voltage level is double the standard voltage level.
14. CR motor isolation resistance sensor (monitored by port AN2 of the CPU)
To provide information about the CR motor life, the analog port (AN2) of the CPU checks the isolation
resistance every time the printer is turned on. If the isolation resistance is equal or less than 2.2 K ohms, a
carriage error is detected and the printer beeps.
15. PSB/PSE Board power off sensor (signal interface)
When the +37 VDC line voltage drops, the PSB/PSE board sends a HIGH POFF signal to the C204 MAIN
board.