Filter
Top Products
DFX-8500
Rev. B
4-
6
Step 3: Attach the another needle to the master surface, APPROX. 2.00 mm depth, then correspond to the
another gauge measure, and tighten the hexagonal screw.
Step 5: Set the black marker to the "0" position.
2. Attach the gauge needle to the
master surface, then correspond
to the another gauge measure.
3. Tighten the hexagonal screw.
Figure 4-7. Dial Gauge set Up 2
Figure 4-8. Black Marker to “0” Position Setting