Filter
Top Products
DISASSEMBLY AND ASSEMBLY
Rev. B
3-3
5
3.2.6.4 Ribbon Jam Sensor Removal
Step 1: Remove the right cover. (Refer to Section 3.2.3.2)
Step 2: Disconnect the connector for the sensor from the connector junction board.
Step 3: Remove the CP(S-P1) (M3x6) screw securing the sensor to the bracket, and remove the sensor.
C P(S-P1) (M 3x6)
F ro n t/R e a r T ra c to r S e le c t L e v e r A s s e m b ly
Figure 3-51. Ribbon Jam Sensor Removal