Filter
Top Products
DFX-8500
Rev. B
1-10
Continuous forms with labels : Refer to Figure 1-5.
ABCD W XYZ
LM
RM
BM
TM
PL
PW
Printable Area
LO L R O LLabel
BOL
TO L
LFL R FL
Label
BFL
TFL
Label
N on Printable Area
Continuous Paper
PW (width) Refer to Section 1.2.12.
PL (length) Refer to Section 1.2.12.
LM (left margin) 13 mm to 31mm
RM (right margin) 13 mm or more
TM (top margin) 2.6 mm or more
BM (bottom margin) 4.2 mm or more
LFL (left margin from label) 65 mm or more
RFL (right margin from label) 65 mm or more
TFL (top margin from label) 12.5 mm or more
BFL (bottom margin from label) 12.5 mm or more
LOL (left margin on label) 5 mm or more
ROL (right margin on label) 5 mm or more
TOL (top margin on label) 2 mm or more
BOL (bottom margin on label) 2 mm or more
Notes 1:
Feeding backward or paper (PATH) selection are prohibited.
Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular.
Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed..
Notes 4: Forms-override printing is available 20 lines after the paper end.
(Paper feeding pitch is not guaranteed.)
The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper.
Figure 1-5. Continuous Forms with Labels Printable Area